Surfapore C

Surface Application: The application surface should be dry and clean. Apply SurfaPore C by using a brush, a roller or spraying. No dilution is required; on very absorptive surfaces reapply within 3 hours. Mixing: Replace 1/3 of water used in your mix with SurfaPore C. Mix well. In any case (surface application or mixing) test results on a small area before full scale application. Maximum water repellence is achieved 24 hours post application. Consumption Rate: 8-10 square meters per litre of SurfaPore C. Packaging: PE Containers 1L, 4L, 30L, IBC 1000L.